TYAN S5535-HE (S5535AG2NR-HE) (EOL) - Downloads

How to Flash?

TYAN makes no warranties to the usability of a BIOS on our website and are made available to the public on an "as-is" basis. Upgrading a BIOS without knowing the implications may cause serious adverse affects. Please do not upgrade a BIOS unless directed to do so by a qualified support technician. TYAN is not able to replace mis-used or damaged BIOS chips in the event of a BIOS flash failure. Please contact your dealer for replacements or warranty service.

File Name:
S5535-HE_v304 (5.25M)
File Date:
2018 / 03 / 09
Version:
V3.04

Description:
- Intel Product Security Incident Response Team (PSIRT): SCA-PSIRT-TA 201710-003.
MCU updates to fix Branch Target Injection of side-channel cache timing attacks.
Updated Micro code to M32306C3_00000024.
- ME Firmware needs update to 9.1.42.3002 to resolve the vulnerabilities identified in Security Advisory Intel-SA-00086
File Name:
S5535-HE_v303 (5.25M)
File Date:
2017 / 05 / 24
Version:
V3.03

Description:

- Updated ME Firmware to 9.1.41.3024 for fixed security vulnerability.
- Updated Microcode Haswell to M32306C3_00000022
- Updated Microcode Broadwell to M2240671_00000017
MUST update ME Firmware!!!

Flash BIOS with ME update from V3.02 to 3.03 STEP by STEP:
  1. Extract 5535V303.zip to your bootable USB Storage
  2. Power on your system and boot to DOS
  3. Reboot system and enter to BIOS Setup Menu
  4. Select Advanced > PCH-FW Configuration >> Firmware Update Configuration >>> Me FW Image Re-Flash [Enabled]
  5. Press F4, then select Yes and press Enter
  6. Waiting for system boot to DOS
  7. Run flash.bat
  8. If you read the message "WARNING: System must power-off to have the changes take effect!", please power off your system
  9. Then power on your system and enter BIOS Setup Menu: Advanced > PCH-FW Configuration to check ME Firmware whether was updated.
  10. Exit to BIOS Setup Menu and Done
File Name:
S5535-HE_v302 
File Date:
2015 / 05 / 18
Version:
V3.02

Description:

- Supported Broadwell CPU
- Updated :
1. Intel RC Code : 2.7.1.0
2. ME Firmware : 9.1.25.1005
3. Broadwell Microcode : M2240671_FFFF0010
4. Legacy Intel RAID OPROM : v13.0.0.2075
5. UEFI Intel RAID Driver : v13.0.0.2075
6. VBIOS : v5.5.1036
7. UEFI GOP Driver : v5.5.1031
- Fixed that Memory Frequency could not be changed
- Fixed that L1 Data Cache and L4 Cache did not be presented

**Intel Graphics Driver does not support S4

**Please note upgrade to Broadwell CPU requires ME update
Flash BIOS with ME update from V3.01 to 3.02 STEP by STEP:
01) Extract 5535V302.zip to your bootable USB Storage
02) Power on your system and boot to DOS
03) Reboot system and enter to BIOS Setup Menu
04) Select Advanced > PCH-FW Configuration >> Firmware Update Configuration >>> Me FW Image Re-Flash [Enabled]
05) Press F4, then select Yes and press Enter
06) Waiting for system boot to DOS
07) Run flashME.bat
08) If you read the message "WARNING : System must power-off to have the changes take effect!", please power off your system
09) Clear CMOS by Jumper(J4)
10) Then power on your system and enter BIOS Setup Menu : Advanced > PCH-FW Configuration to check ME Firmware whether was updated.
11) Exit to BIOS Setup Menu and Done
File Name:
S5535-HE_v301 
File Date:
2014 / 04 / 25
Version:
V3.01

Description:

- Supported Haswell Refresh CPU(**)
- Updated :
1. Intel RC Code : 1.8.0.0
2. ME Firmware : 9.0.31.1487
3. Haswell Microcode : M32306C3_00000017
4. Legacy Intel RAID OPROM : v13.0.0.2075
5. UEFI Intel RAID Driver : v13.0.0.2075
6. UEFI GOP Driver : v5.0.1036

- Added new items :
1. Advanced > SATA Configuration >> SATA Controller Speed [Default]
2. Advanced > SATA Configuration >> Software Feature Mask Configuration >>> OROM UI and BANNER [Enabled]
3. Advanced > SATA Configuration >> Software Feature Mask Configuration >>> OROM UI Delay [4 seconds]
4. Boot > Wait For 'ESC' If Error [Enabled]
(PS: When SATA Mode Selection = RAID, the 1. ,2. .3. are showed up at BIOS Setup Menu )
- Added an new function that "Wait for 'ESC' If error"

**Please note upgrade to Haswell Refresh CPU requires ME update Flash BIOS with ME update from V3.00 to 3.01 STEP by STEP:

01) Extract 5535V301.zip to your bootable USB Storage
02) Power on your system and boot to DOS
03) Reboot system and enter to BIOS Setup Menu
04) Select Advanced > PCH-FW Configuration >> Firmware Update Configuration >>> Me FW Image Re-Flash [Enabled]
05) Press F4, then select Yes and press Enter
06) Waiting for system boot to DOS
07) Run flashME.bat
08) If you read the message "WARNING : System must power-off to have the changes take effect!", please power off your system
09) Then power on your system and enter BIOS Setup Menu : Advanced > PCH-FW Configuration to check ME Firmware whether was updated.
10) Exit to BIOS Setup Menu and Done
File Name:
S5535-HE_v300 
File Date:
2013 / 08 / 28
Version:
V3.00
Description:

- S5535-HE BIOS initialized

Click the links below for the appropriate drivers and setup information. For .zip files, you must have a file compression / decompression utility such as WinZip. For .exe files, be sure to select the "Save" option when clicking on the file being downloaded, and choose your preferred drive location where you want the file to be saved.


Memory:
Memory Frequency:   
Vendor   Size   Voltage   Description(RoHS)
Vendor Part #   
Memory Chip /
Chip Part # /AMB Chip   
Datasheets:
Date   Filename   Version   
2013 / 06 / 25    DataSheet_S5535    v1.0   
HDD:
HDD/SSD Type:   
Vendor   Model   Form Factor   Interface   Capacity