Tyan Thunder HX FT77DB7109 (B7109F77DV10E4HR-2T-N) - Downloads

How to Flash?

TYAN makes no warranties to the usability of a BIOS on our website and are made available to the public on an "as-is" basis. Upgrading a BIOS without knowing the implications may cause serious adverse affects. Please do not upgrade a BIOS unless directed to do so by a qualified support technician. TYAN is not able to replace mis-used or damaged BIOS chips in the event of a BIOS flash failure. Please contact your dealer for replacements or warranty service.

File Name:
FT77D-B7109-2T-V10E4HR_v104 (12.7M)
File Date:
2018 / 05 / 07
Version:
V1.04.B50

Description:
- Fix system into infinite reboot loop when OOR occured at first power on
- Disable uefi error code report
- Set MMIO High Base to 3T as default
- Primary VGA output workaround
- Fix 64G memory can't be shown in BMC webUI
- Add sdr number to 100
- Fix statics router IP of BMC setup page can't be set
File Name:
FT77D-B7109-2T-V10E4HR_v102 (13.1M)
File Date:
2017 / 12 / 12
Version:
V1.02.B50

Description:

- Normalize the pcie slot information in BMC web and increase the number to 11 slots
- Fix POST won't show BMC version and IP when quiet boot is enable
- Modify BMC version and IP strings at POST
- Add option rom control for PLX slot
- Set Lan V710 resource 4G decode disable
- Fix NVDIMM at slot E1 for both CPU will cause system reboot
- Modify BIOS main page
- Disable BMC virtual USB device at POST
- Fix FRB-2 doesn't work at POST
- Cancel limit plug-in lan card's resource to 32 bit
- Update CRB code to version 083
- Update RC to 147.R15
- Update SPS to SPS_E5_04.00.04.288.0
- Update RSTe preOS driver to 5.3.1052
- Add changelogo function and default is enabled
- Change PCH state after G3 to last state as default
- Change banner for 4 HDD sku
- Change BIOS settings default for NVMe sku
- ADD NVDIMM trigger settings
File Name:
FT77D-B7109-2T_v101 (12.7M)
File Date:
2017 / 08 / 11
Version:
V1.01.B10

Description:
- Update H0 ucode to M9750654_02000026
- Modify strings for power policy after G3
- Change default for active video to onboard
- Add Wintec and Unigen DIMM manufacturer
- Change recovery image name to 7109_001.CAP
- Modify active video stiring to onboard and offboard
- Fix HDD forzen fail
- Modify SPS FW to mask un-use event
- Send PSU status disable command to BMC when PSU status set to disable
- Modify NVMe vpp address
- Set GPP_D19 default high
- Set onboard X550 option rom default disable
- Hide SATA, sSATA and VGA option rom control
- Fix sync fru issue
- Limit lan device's resource under 4G
- Cancel DMI sync to fru function
File Name:
FT77D-B7109-2T_v100 (12.7M)
File Date:
2017 / 07 / 10
Version:
V1.00.B10

Description:
- FT77D-B7109-2T BIOS initialize

 

File Name:
FT77D-B7109-BMC_v104 (25M)
File Date:
2018 / 04 / 23
Version:
v4.00

Description:
- Add PSU Power & PSU Fan & PSU POUT.
- Web flash BIOS force ME recovery.
- Disable veto bit for second share port.
- Set ip return err code.
- OEM command support 64GB memory size.
File Name:
FT77D-B7109-8X-bmc_v200 (25M)
File Date:
2018 / 04 / 23
Version:
v2.00

Description:
- Add PSU Power & PSU Fan & PSU POUT.
- Set ip return err code.
- OEM command support 64GB memory size.
File Name:
FT77D-B7109-BMC_v103 (24.3M)
File Date:
2017 / 12 / 12
Version:
v3.00

Description:

- Add OEM Command to enable/disable NVDIMM reset/DC off features.
- Add KVM(HTML5).
- Add BMC WDT Support.
- Modify PCIE MAX Solt To 11.
- Disconnect CD Session when pushing stop media.
- Fixed BMC Time is incorrect when change time zone by Web.
- Modify V100 GPU UC To 87 degree.
File Name:
FT77D-B7109-BMC_v102 (23.8M)
File Date:
2017 / 09 / 25
Version:
v2.00

Description:
- Add default fan curve for unknown NVIDIA GPU card(Include Tesla V100).
- Fixed chassis id led will keep bright if push ID button after sending Chassis Identify Command.
- Enhance the performance of install OS by KVM.

File Name:
FT77D-B7109-BMC_v100 (22.5M)
File Date:
2017 / 07 / 10
Version:
v1.00

Description:
- First Released.

Click the links below for the appropriate drivers and setup information. For .zip files, you must have a file compression / decompression utility such as WinZip. For .exe files, be sure to select the "Save" option when clicking on the file being downloaded, and choose your preferred drive location where you want the file to be saved.


Memory:
Memory Frequency:   
Vendor   Size   Voltage   Description(RoHS)
Vendor Part #   
Memory Chip /
Chip Part # /AMB Chip   
Datasheets:
Date   Filename   Version   
2017 / 08 / 11    DataSheet_FT77D-B7109    v1.0   
HDD:
HDD/SSD Type:   
Vendor   Model   Form Factor   Interface   Capacity