|
|
SMDC (IPMI) Product
|
|
|
Compatible with
S2925,S2925-E,S2927-E,S2932,S2932-E,
S2933,S3850,S3892,S3950,S3970G2NR,
S3992,S3992-E,S4985,S5162,S5180,
S5197,S5372,S5372-H,S5372-LC,S5372-LH,
S5382,S5383,S5392,S5396,FT48B4985,
FT48B4985-E,FT48B5382,GT14B5180,GT24B2891,GT24B2932,
GT24B2932-E,GT24B5383,TA26B2932,TA26B2932-E,TA26B5380,
TX46B4985,TX46B4985-E,VX50B4985,VX50B4985-E
|
|
|
 |
|
|
Baseboard Management Controller (BMC)
• Renesas H8 2167
Protocols and Standards
• Tailored for IPMI 2.0 compliance
• RMCP (Remote Management and Control
Protocol) & RMCP+ (RMCP Plus) *
• Alert Standard Forum (ASF)
* NOTE: RMCP+ can encrypt confidential remote configuration of parameters such user passwords and transfer of sensitive payload data over SOL.
Enhanced Authentication
• New algorithms provide more robust key
exchange process
Primary Communication Interface
• Keyboard Controller Style (KCS)
Auxiliary Communication Interface
• Intelligent Platform Management Bus (IPMB)
• Local Area Network (LAN)
Auxiliary SMBus / I2C buses
• 4 dedicated and independent buses available
for user expansion
Sensor Monitoring
• Voltage
• Temperature
• Tachometers
• Fan Speed Control / PWM
• Chassis Intrusion
Field Replaceable Unit (FRU)
• Chassis, motherboard, product, and other
information stored and secured in FRU
Form Factor
• 3.956" x 2.375" (100.48mm x 60.325mm)
• Low profile PCI form factor tailored to allow
different mounting varieties
- Fits on PCI slot
- Fits in 3.5" drive bay
- Fits inside almost any chassis .
|
|
|
Control Command Set
• Power Up / Power Down
• System Reset
• System Power Cycle
• System NMI
Diagnostic Command Set
• Power-Good Detection
• CPU Voltage Identification (VID)
• ACPI State Detection
• Request Message Redirection through IPMB
Sensor Data Repository (SDR)
• Detailed sensor information, including sensor
• types and measuring units
System Event Log (SEL)
• Complete history of system events, such as POST
• events, are stored in non-volatile memory
Platform Event Filtering (PEF)
• Provide a mechanism for configure the BMC to
take selected actions on event messages that it
receives or internally generated. These actions
include operations such as power-off, sys. reset,
as well as SNMP Trap
Card Interface
• Proprietary 50-pin interface
(2x25 header, 2mm x 2mm)
Additional Features
• Firmware-upgradeable through flash utility
• Front Panel LED and Buzzer interface/control
Firmware Firewall
• Restrict the ability to execute certain commands
or functions from a given interface
|
|
|
|
|
|
|
|