Beta-BIOS Downloads
The BIOS updates listed below are beta versions only. They are our most recent beta BIOS
files, engineered to add/enhance various features.
|
|
|
|
File Name |
Model # |
Comments |
S5372_104d |
S5372
12/11 |
* Fixed an issue where the W83792 will Disappear if you
[Enable] Autofan control
* Fixed an issue where you can't enter bios Setup, if the
BIOS is set to No Halt during POST and an error had taken
place
* Updated the AHCI Option ROM to v1.08
* Fixed and issue where the system will Halt when WDT is
set in the OS
* Updated the MRC to v1.2 |
S4985_100c |
S4985
12/15 |
* Fixed a reboot issue with 8 CPU when run HPL stress test
* Fixed a system hang at post code 00 with more than 16
2GB Smart modules issue
* Fixed a RSTPro2 card test memory fail issue |
4882-D_A25A |
S4882-D
11/07 |
* Fixed an issue with the TSM software not functioning
correctly |
S4881_106c |
S4881
12/07 |
* Updated AMD PowerNOW! support
* Fixed an Areca1220 raid card boot sequence conflict with
onboard SATA issue
* Updated ECC default values
* Updated the automatic fan control function for greater
accuracy
* Fixed an issue with VMware ESX Server3 where it couldn't
be
installed on LSI MegaRaid SCSI320-2x card issue
* Added AMD errata #153
* Added AMD errata #56
* Updated the nVidia PCIE error handling
* Fixed an issue when using dual nVidia GTX8800 in SLI
mode
* Fixed an issue where the PC speaker rings continuously |
S2895_104a |
S2895
11/30 |
* Fixed an issue with nVidia Geforce 8800GTX cards where
they would have a yellow ! next to the second card
stating
no resources available
* Added AMD errata 169
* Fixed an issue with proper detection of Qlogic cards on a
133MHz PCI-X bus
* Fixed an issue where the Option ROM scanning couldn't
be disabled in PCI-X slot 7
* Fixed booting to a CD/DVD which is set as Master on the
IDE channel when there
are no other IDE HD's present
* Fixed an issue where SATA HD's would not enumerating
at Int13 properly
* Fixed a "Linux OS Level_triggered_interrupt and
edge_triggered_interrupt" error |
S2891_202t |
S2891
12/01 |
* Added AMD Errata 169
* Updated support for Ex stepping CPU's
* Added PCIe and embedded VGA option so that if there is
a PCI-E VGA card present you can still choose to boot
from embedded VGA.
* Updated 'version and serial number' DMI strings
* Fixed a compability issue with nVidia Geforce 7950 Gx2
PCIE VGA cards during POST
* Updated AMD PowerNOW! support
* Fixed a compatilbity issue with QSI DVD-ROM drives not
showing up during POST
* Added AMD Errata131
* Upgrade to latest NVMM & NVRAID
* Fixed a memory detection issue |
S2881_207b |
S2881
09/29 |
* Update 64Mbit Flash module for support new SST flash
part revision. (49LF040B-revAC)
* Added Boot-To-BIOS support
* Updated AMD PowerNOW! support
* Updated CPU micro code |
S2696_102a |
S2696
11/06 |
* Updated the MRC to v1.20
* Fixed a Clovertown CPU Cache display issue
* Fixed an issue with incorrect Memory Speed Display being
shown during POST
* Updated the Splash Screen Module to fix a "ATI
5000/7000 series VGA wrong color"
issue
* Updated DMI information of Memory DIMMs.
* Updated CPU Micro code |
S2692_102a |
S2692
11/20 |
* Updated the MRC to v1.20
* Fixed an issue with the way the Clovertown Cache displayed
* Updated Splash Screen Module that addresses a "ATI
5000/7000 VGA chipset wrong color" issue
* Added the memory speed display during POST
* Updated the DMI information of Memory DIMMs
* Updated CPU micro coding |
NOTE:
Understand that these updates are STRICTLY
in beta stage, and are not "production worthy" at this time. If you have problems with any of the beta BIOS versions listed here, TYAN Technical Support will strongly encourage you to flash your BIOS to a fully supported version.
|
