Definitions:
Boot Disk
- Refers to either a Windows 95 or Windows 98 boot disk. Any other type of boot disk might load memory resident programs which will interfer with the flash process. Make sure you hit the F5 key when the boot disk first starts running to make sure no other programs are loaded in the back ground without your knowledge.
Bios Flash Package
- Unzip the entire bios package to a seperate clean floppy. Insure there are 3 files that are unpacked during the unzip processRequirements:
Two separate diskettes
are needed. The first diskette is the Windows 95/98 Boot Disk. The second diskette should contain the 3 files needed to flash the bios. These files are provided when you unzip the bios
flash package from the website. Procedure:
At the A: prompt simply type in "flash" and the rest will be handled by the files included in your download. |
|
Date |
BIOS |
Description |
|
|
|
TYAN TIGER K8SSA BIOS V1.04
New features and Fixes :
* Fixed the issue where DMI data can not be updated when using DMI tool * Fixed the issue where 'IPMI Support Enabled/Disabled' in Setup Menu has no function
* Updated AMD PowerNOW! support |
|
|
|
|
TYAN TIGER K8SSA BIOS V1.03
New features and Fixes :
* Added support for the M3291 * Fixed an issue where Memtest would fail when using an USB floppy * Fixed the device type error issue under BIOS setup
* Fixed HCT12.1 USB wakeup test failure * Fixed a issue where BIOS will only display a single SATA drive when multiple SATA drives are present (Seagate HDD only)
* Added error beep if no DIMMs present * Added Endless Boot option in BIOS setup * Updated RAID Option ROM file from v.RC-200-2005289.1 to v.RC-210-2006044.3 |
|
|
|
|
TYAN TIGER K8SSA BIOS V1.02
New features and Fixes :
* Fixed an issue where SATA HD's would still show up even if the SATA chipset is disabled * Fixed Fan3 and Fan4 were not functioning correctly
* Updated the SATA Option ROM to v3.0.00.15.3 * Fixed an issue where some Seagate SATAII HD's were not being detected properly
* Fixed an issue where after a Windows crash the HD's would not be detected properly * Fixed a compatiblity issue with RedHat 4 64-bit where it would hang
after booting the kernel * Fixed an issue wehre the LInux clock was running at twice the speed as the RTC |
|
|
|
|
TYAN TIGER K8SSA BIOS V1.01
New features and Fixes :
* Added TYAN full screen logo in quiet mode POST. * Showed installed memory capacity in BIOS configuration table * Added a patch for a HCT non-report I/O issue
* Updated AMD Opteron CPU support * Updated the way Smart Fan speed function is controlled * H/W memory Hole fail safe default change to [Enabled]
* Interrupt 19 Capture default change to [Enabled] * Fixed Intel PCI-X ZCR card can not be used. * UPdated CPU temperature reporting for greater accuracy
* SATA Option ROM upgraded to v3.0.0012.1 * Fixed a issue where if the M3291 is present the system will be unexpectedly wake up from various sleep states |
|
|
|
|
TYAN TIGER K8SSA BIOS V1.00
New features and Fixes :
* This is the first BIOS release |
|