10/25/00

896v104.exe

TYAN THUNDER 2500  (S1867 DLUAN )  V.1.04
New Features and Fixes :
CPU support up to 1 GHz.

10/25/00

1010v104.exe

TYAN THUNDER 2500  (S1867 DLU3AN )  V.1.04
New Features and Fixes :
CPU support up to 1 GHz.

09/08/00

896V103.exe

TYAN THUNDER 2500   V.1.03 (S1867 DLUAN)
New Features and Fixes :
Improved performance and updated on board SCSI ROM.  * This is for the LSI-896 chip support.

09/08/00

1010V103.exe

TYAN THUNDER 2500   V.1.03 (S1867 DLU3AN)
New Features and Fixes :
Improved performance and updated on board SCSI ROM.  * This is for the LSI-1010 chip support.

04/14/00

8960414.exe

TYAN THUNDER 2500   V.preliminary
This is the first BIOS release for Thunder 2500 (S1867 V2.1) board.  *This is for the LSI-896 chip support (S1867 V2.1 board).

04/14/00

10100414.exe

TYAN THUNDER 2500   V.preliminary
This is the first BIOS release for Thunder 2500 (S1867 V2.2) board.  *This is for the LSI-1010 chip support (S1867 V2.2 board).

Phlash.zip

Get the latest flash utilities here: Flash Utility

Note : To flash, you need to have 3 files on the same floppy -

                1. Phlash.exe (flash utility inside the Phlash.zip)
                2. Platform.bin
                3. The xxxx.rom (bios file) as listed in the table above.

Note for V.1.03 BIOS :

We added TYAN in to the DMI string, but the phlash did not over write the old DMI data, so the flash utility will find the DMI string is different in the old V1.01 and new V1.03 BIOS.  This causes error message :

        > New DMI string is too large< Please reboot.

Please use the following command line to correct this problem :

        > phlash biosfile.rom /mode=3

The /mode=3 parameter will over write the old DMI data.