TYAN S7106 (S7106GM2NR) - Downloads

How to Flash?

TYAN makes no warranties to the usability of a BIOS on our website and are made available to the public on an "as-is" basis. Upgrading a BIOS without knowing the implications may cause serious adverse affects. Please do not upgrade a BIOS unless directed to do so by a qualified support technician. TYAN is not able to replace mis-used or damaged BIOS chips in the event of a BIOS flash failure. Please contact your dealer for replacements or warranty service.

File Name:
S7106GM2NR_v103 (13.2M)
File Date:
2018 / 03 / 01
Version:
V1.03.ROM

Description:
- Update MCU to M9750654_02000043 INTEL SCA-PSIRT-TA_201710-003_rev_3_13, MCU updates to meet FW updated for Branch Target Injection of side-channel cache timing attacks.
- Update VBIOS
- unHide PCIe DeEmphasis option
- Support Tyan smbios tool
- Cancel pcie slot configuration
- Fix I210 can't get IP in VMware EFI mode
- Add COM2 for console redirection
- unHide SNC option
- Add option "Erase-Arm NVMDIMMs"
- Add option "Restore NVDIMMs"
- Add option "Interleave NVDIMMs"
File Name:
S7106GM2NR_v102 (13.2M)
File Date:
2017 / 12 / 07
Version:
V1.02.ROM

Description:
- Fix POST won't show BMC version and IP when quiet boot is enable
- Modify BMC version and IP strings at POST
- Improve sometimes will hang up at entering setup
- Add 6 seconds delay after setting BMC lan configuration
- Fix NVDIMM at slot E1 for both CPU will cause system reboot
- Modify BIOS main page
- Disable BMC virtual USB device at POST
- Fix FRB-2 doesn't work at POST
- Update CRB code to version 083
- Update RC to 147.R15
- Update SPS to SPS_E5_04.00.04.288.0
- Update RSTe preOS driver to 5.3.1052
- Add NVDIMM settings items
- Fix boot manager in 3.5 inch HDD will be gone after reset
- Fix CTRL + HOME is not working
- Fix ECC won't have SEL log
- Modify ECC sensor number
- Fix sync fru issue
File Name:
S7106GM2NR_v101 (12.8M)
File Date:
2017 / 08 / 07
Version:
V1.01.ROM

Description:
- Update H0 ucode to M9750654_02000026
- Modify strings for power policy after G3
- Change default for active video to onboard
- Add Wintec and Unigen DIMM manufacturer
- Change recovery image name to 7106_001.CAP
- Modify active video stiring to onboard and offboard
- Fix HDD forzen fail
- Modify SPS FW to mask un-use event
- Send PSU status disable command to BMC when PSU status set to disable
- Fix sync fru issue
File Name:
S7106GM2NR_v100 (12.8M)
File Date:
2017 / 07 / 10
Version:
V1.00.ROM

Description:
- S7106GM2NR BIOS initialize

 

File Name:
S7106GM2NR-L2-BMC_v200 (24.2M)
File Date:
2017 / 12 / 05
Version:
v2.00

Description:
- Implement HTML5 KVM.
- Implement NVDIMM function.
- Change web timeout to 900s.
- Change HTML5 & Java naming.
- S7106GM2NR & S7106GM2NR-L2 use same bmc fw.
File Name:
S7106GM2NR-L2-BMC_v100 (23.2M)
File Date:
2017 / 07 / 05
Version:
v1.00

Description:
- First Released

( for S7106GM2NR, S7106GM2NR-L2 )

Click the links below for the appropriate drivers and setup information. For .zip files, you must have a file compression / decompression utility such as WinZip. For .exe files, be sure to select the "Save" option when clicking on the file being downloaded, and choose your preferred drive location where you want the file to be saved.


Memory:
Memory Frequency:   
Vendor   Size   Voltage   Description(RoHS)
Vendor Part #   
Memory Chip /
Chip Part # /AMB Chip   
Datasheets:
Date   Filename   Version   
2017 / 11 / 15    DataSheet_S7106    v1.0   
HDD:
HDD/SSD Type:   
Vendor   Model   Form Factor   Interface   Capacity   
Click the links below to download utilities and setup information. For .zip files, you must have a file compression / decompression utility such as WinZip. For .exe files, be sure to select the "Save" option when clicking on the file being downloaded, and choose your preferred drive location where you want the file to be saved.


File Name:
TYAN_SMBIOS_V1.0 (61K)
File Date:
2018 / 07 / 23
Version:
V1.0
The DMI tool is designed for Tyan platforms only. It supports data re-written under 64bit Linux environment.