Tyan Tempest HX S7100 (S7100GM2NR) - Downloads

How to Flash?

TYAN makes no warranties to the usability of a BIOS on our website and are made available to the public on an "as-is" basis. Upgrading a BIOS without knowing the implications may cause serious adverse affects. Please do not upgrade a BIOS unless directed to do so by a qualified support technician. TYAN is not able to replace mis-used or damaged BIOS chips in the event of a BIOS flash failure. Please contact your dealer for replacements or warranty service.

File Name:
S7100GM2NR_v103 (12.3M)
File Date:
2018 / 07 / 26

-1. Modify SPS SMLINK0 IPMB address to 0x20.
-2. Update Intel CPU uCode patch for Meltdown and Spectre. M9750653_01000144 Intel(R) SkyLake Processor B-1 Stepping MB750654_0200004D Intel(R) SkyLake Processor H-0, M-0, U-0 Stepping -3. Added health sensors states for Intel DCM function.
-4. Added RAS-Report warning message and SEL while CPU be changed.
-5. Added RAS-Report warning message and SEL while DIMM be changed.
-6. Added new smart fan control feature in BIOS setup.
-7. Fixed remove PSU that SDR status incorrect issue.
-8. Added 64GB DIMM info report to BMC system inventory.
-9. Added primary external VGA decode under 4G.
-10. Added CPU IOU BIOS setup item PCIE slot help string.
-11. Added Tyan smbios linux application support.
File Name:
S7100GM2NR_v102 (12.3M)
File Date:
2018 / 03 / 06

- 1.CPU IIO PCIE hot-plug set to enabled default.
- 2.Remove Memory RAS Partol scrub interleave and address setup items.
- 3.Modify setup string "onboard Device" to "Onboard Device".
- 4.Add two items in IIO configuration: and
- 5.Update BMC version and LAN ip post message for TYAN Spec.
- 6.Fixed POST message and status code message overlap issue.
- 7.Add CPU IIO De-Emphasis setup items and setting -3.5db default.
- 8.Fixed to use ODM “change logo” function when setup item load default then BMC logo enable issue.
- 9.AST2500 VBIOS v1.06.00 update.
-10.Add CPU PCIE IIO setup x4x4x4x4 item.
-11.Extended buffer size for BMC SDR record and improve fault tolerance.
-12.Support TYAN P2111 + M2110 riser card.
-13.Correct ACPI SPMI table.
-14.Add SNC setup item in UPI general configuration page.
-15.Fixed HPET device not visible to OS or Windows Device Manager.
-16.Fixed PSU power meter SDR reading issue.
-17.Add "Erase-Arm NVDIMMs" ,"Restore NVDIMMs" and "Interleave NVDIMMs" setup item in Memory Configuration page.
-18.Support S7100AGM2NR-EX SKU (S7100GM2NR + Audio) in S7100GM2NR and FT48B-B7100 BIOS.
-19.IO Port 0xB3 value isn't clear after boot into UEFI Shell.
-20.x8 slot bifurcation can support x4/x4 by set item.
-21.Update Intel(R) SkyLake Processor H-0, M-0, U-0 Stepping microcode to MB750654_02000043.
-22.Update Intel(R) SkyLake Processor B-1 Stepping microcode to M9750653_01000140.
File Name:
S7100GM2NR_v101 (12.3M)
File Date:
2017 / 11 / 15


- 1.Update MB750654 H-0 Stepping ucode to 02000035.
- 2.Update SPS to
- 3.Modify After G3 function to "Last States" default.
- 4.Fixed string error in "Intel Virtual RAID on CPU" setup page.
- 5.Fixed BMC share LAN get info slowly issue.
- 6.Update Intel VROC uefi driver to
- 7.Disable SPS SDR unused event notifying.
- 8.Update setup "Active Video" items.
- 9.Fixed BIOS hang 0x92 if VMD port enabled in M.2.
- 10.Add VMD port hidden setting for onboard device.
- 11.Add NVDIMM reset and shutdown to restore customer function.
- 12.Clear the bottom line of the screen when show 800x600 logo.
- 13.Fix PSU setup item hidden issue.
- 14.Fixed BIOS post SATA info string overlap status code string issue.
- 15.Fixed system memory information report BMC incorrect.
- 16.Fixed when BMC FRU data and SMBIOS data changed than BMC FRU flag can not be updated issue.
- 17.Recovery bios file name change to (BIOS_TAG).CAP.
- 18.Remove SEL log "Unrecoverable video controller" if 2 VGA device install.
- 19.Fixed onboard LAN UEFI driver rom policy module issue.
- 20.Enabled 64 bit memory resource for VGA device. Change workaround for 64bit VGA CSM compatibility issue.
File Name:
S7100GM2NR_v100 (7.14M)
File Date:
2017 / 10 / 18


- S7100GM2NR BIOS initialized


File Name:
S7100GM2NR-BMC_v400 (24.6M)
File Date:
2018 / 04 / 23

- Set ip return err code
File Name:
S7100GM2NR-BMC_v300 (24.6M)
File Date:
2018 / 03 / 26

- Update to Redfish V1.0 module
- Disable NULL User and default null user password change
- Hide Html5 vmedia function
- Add PSU Info Temp , Pout , FAN
- flash BIOS force ME recovery
- Add DCMI Get Power reading for Watt
- Implement HTML5 KVM.
- Implement NVDIMM function.
- Change web timeout to 900s.
- Change HTML5 & Java naming.
File Name:
S7100GM2NR-BMC_v100 (22.6M)
File Date:
2017 / 07 / 10


- First Released.

Click the links below for the appropriate drivers and setup information. For .zip files, you must have a file compression / decompression utility such as WinZip. For .exe files, be sure to select the "Save" option when clicking on the file being downloaded, and choose your preferred drive location where you want the file to be saved.

Memory Frequency:   
Vendor   Size   Voltage   Description(RoHS)
Vendor Part #   
Memory Chip /
Chip Part # /AMB Chip   
Date   Filename   Version   
2017 / 07 / 26    DataSheet_S7100    v1.0   
HDD/SSD Type:   
Vendor   Model   Form Factor   Interface   Capacity