Tyan Tempest HX S7100 (S7100AG2NR) - Downloads

How to Flash?

TYAN makes no warranties to the usability of a BIOS on our website and are made available to the public on an "as-is" basis. Upgrading a BIOS without knowing the implications may cause serious adverse affects. Please do not upgrade a BIOS unless directed to do so by a qualified support technician. TYAN is not able to replace mis-used or damaged BIOS chips in the event of a BIOS flash failure. Please contact your dealer for replacements or warranty service.

File Name:
S7100AG2NR_v303 (14.2M)
File Date:
2018 / 07 / 27
Version:
V3.03

Description:
-1. Update Intel CPU uCode patch for Meltdown and Spectre.
M9750653_01000144 Intel(R) SkyLake Processor B-1 Stepping
MB750654_0200004D Intel(R) SkyLake Processor H-0, M-0, U-0 Stepping
-2. Added RAS-Report warning message while CPU be changed.
-3. Added RAS-Report warning message while DIMM be changed.
-4. Added primary external VGA decode under 4G.
-5. Added CPU IOU BIOS setup item PCIE slot help string.
-6. Added Tyan smbios linux application support.
File Name:
S7100AG2NR_v302 (14.2M)
File Date:
2018 / 03 / 06
Version:
V3.02

Description:
- 1. CPU IIO PCIE hot-plug set to enabled default.
- 2. Remove Memory RAS Partol scrub interleave and address setup items.
- 3. Modify setup string "onboard Device" to "Onboard Device".
- 4. Add two items in IIO configuration : and
- 5. Fixed POST message and status code message overlap issue.
- 6. Add CPU IIO De-Emphasis setup items and setting -3.5db default.
- 7. AST2510 VBIOS v1.06.00 update.
- 8. Add CPU PCIE IIO setup x4x4x4x4 item.
- 9. Support TYAN P2111 + M2110 riser card.
- 10. Add SNC setup item in UPI general configuration page.
- 11. Fixed HPET device not visible to OS or Windows Device Manager.
- 12. Add "Erase-Arm NVDIMMs" ,"Restore NVDIMMs" and "Interleave NVDIMMs" setup item in Memory Configuration page.
- 13. IO Port 0xB3 value isn't clear after boot into UEFI Shell.
- 14. x8 slot bifurcation can support x4/x4 by set item.
- 15. Update Intel(R) SkyLake Processor H-0, M-0, U-0 Stepping microcode to MB750654_02000043.
- 16. Update Intel(R) SkyLake Processor B-1 Stepping microcode to M9750653_01000140.
File Name:
S7100AG2NR_v301 (14.2M)
File Date:
2017 / 11 / 15
Version:
V3.01

Description:
1. Modify After G3 function to "Last States" default.
2. Update Intel VROC uefi driver to 5.3.0.1052
3. Update setup "Active Video" items.
4. Fixed when enable VMD then NVME bootoption that show garbage string.
5. Fixed when modify boot option sequence then system cold reset.
6. Fixed clear tpm prompt string "F12" lost in setup post stage.
7. Fixed BIOS hang 0x92 if VMD port enabled in M.2.
8. Add VMD port hidden setting for onboard device.
9. Fixed CPU PCIE setup items when setup F3 load default then hidden.
10. Add onboard LAN option rom policy item when LAN disabled item hidden.
11. Fixed inforeport module to post SATA info string overlap status code string issue.
12. Add NVDIMM reset and shutdown to restore customer function.
13. PhyTune SSATA Port and USB2.0 Port SI fail.
14. Modify SATA and sSATA RAID optionROM post UI delay to 4 seconds.
15. Fixed Tcg Setup when load default then item hidden.
16. Update MB750654 H-0 Stepping ucode to 02000035.
File Name:
S7100AG2NR_v300 (8.86M)
File Date:
2017 / 07 / 05
Version:
V3.00

Description:

- S7100AG2NR BIOS initialized

Click the links below for the appropriate drivers and setup information. For .zip files, you must have a file compression / decompression utility such as WinZip. For .exe files, be sure to select the "Save" option when clicking on the file being downloaded, and choose your preferred drive location where you want the file to be saved.


Memory:
Memory Frequency:   
Vendor   Size   Voltage   Description(RoHS)
Vendor Part #   
Memory Chip /
Chip Part # /AMB Chip   
Datasheets:
Date   Filename   Version   
2017 / 07 / 26    DataSheet_S7100    v1.0   
HDD:
HDD/SSD Type:   
Vendor   Model   Form Factor   Interface   Capacity